Welcome to the exciting world of creativity, where ordinary paper tubes are transformed into amazing architectural masterpieces! If you have ever wondered how to create something unique with your own hands, this article is for you. Paper tubes become the building material for your own home, filled with fantasy, warmth and coziness.
A beautiful country house with your own hands
Surely almost everyone has magazines, notebooks, sketches or books that are no longer needed and no one uses them. That’s what we need right now. To make paper tubes, you will need a stick (needle, sushi stick, skewer).
Take half a sheet of A4, fold it in half and cut it in half.
You now have A5 size. Next, take a stick and wrap it with this paper. When you reach the edge of the paper, put glue on the edge and twist it to the end. Hold it for a few seconds and you can pull the stick out. You need 150 of these blanks.
Next, you need to make the blanks for the house itself. The first blank is the front, with a door, the sizes are shown in the photo below. The second blank is exactly the same, but without a door. You will need to cut out windows and doors on all the blanks. You will also need 2 blanks without windows and doors of the same size.
Next, take a blank without windows, apply glue to it, and start gluing the tubes. Glue in a “checkerboard” pattern as shown in the picture below.
Where the roof of the house begins, glue the tubes in the middle. When you reach the point where the roof narrows, you can cut the tubes to size.
Turn the blank over and trim the tubes to fit the blank, as shown in the photo below.
Next, glue the front of the house.
Glue all the blanks to the tubes.
The window frames can be glued with flattened tubes. And make a partition at the windows. Here’s what you should end up with:
Use the same principle to make the roof. The sizes of the blanks are given below:
Finally, we assemble the house itself. Join the walls as shown in the photo below.
Glue the walls together with PVA or any other glue. This is what you should end up with.
Next, assemble the roof and glue it to the house. The frame of the house is finished.
Now we make a door for the house in the same way. The size of this part is 8.5 cm by 4.5 cm.
After gluing this part with tubes, insert a skewer into the last tube, cut the ends to the desired size.
Glue the door to the skewer from the top and bottom (you can use hot glue).
Next, glue the base of the house. Take a cardboard of 19×27 cm, apply glue to the sides of the house and glue the cardboard to the house. The cardboard will protrude slightly in front of the house, this part will be a porch or terrace. It will also be glued with tubes.
Next, make supports for the house from 4 cm long tubes and glue them to the ground around the perimeter. You will need about 12 of these for the house.
Next, make a railing for the porch from tubes of any size and make steps.
That’s it. An incredibly beautiful and easy-to-make house is ready.
Share your work in the comments. Everyone will be very interested!