Tinker a Bracelet Stand

If you have tinkered several bracelets following my yesterday’s World Cup alternative tip, surely now you will look for stylish storage for your masterpieces. Therefore, here follows the tutorial for a matching bracelet stand.

Material And Tools – For This DIY Project You Need

  1. an empty kitchen roll
  2. glue gun
  3. a small piece of thick cardboard
  4. self-adhesive foil or a beautiful gift wrap paper (but then you will need an additional adhesive)
  5. scissors
  6. pencil
  7. an old CD for the round bottom shape

DIY Tutorial: The Step-By-Step Craft Instructions

DIY Step 1

With the pencil and the old CD as a template draw a circle on the thick cardboard …

DIY Step 2

… and cut it out.

DIY Step 3

Now wrap the carton of the kitchen roll with the self-adhesive foil. At both edges of the foil leave a few extra centimeters of the foil.

DIY Step 4

Make several cuts on the protruding edges, then bend and glue them into the kitchen roll. So you get a decorative finish.

DIY Step 5

Now both sides of the cardboard cut-out circle will also be covered with the foil. Cut the second side a little larger and after several small cuts on the protruding part of the foil turn it round the carton and glue to get a nice edge.

DIY Step 6

Apply little glue in the middle of the round plate with the glue gun.

DIY Step 7

Now put some glue on the inner edge of the cardboard cylinder and press it on the base. DONE!

DIY Tutorial – Final Result “Bracelet Stand”

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.